Description
[vc_row][vc_column width=”1/2″][vc_column_text woodmart_inline=”no” text_larger=”no”]Key Features
New ground breaking technology to keep supply air within salt solution limits.
- Outer casing 16 swg to increase body strength.
- Tapered plastic spacers which eliminate salt corrosion and improve flow characteristics.
- Free flow Polyurethane seal based on H13 standards.
- New media is water repellent in clean and dirty condition.
- Continuous gasket to secure housing seal.
HydroCel 95 & H12 solves the problem of excess salt solution which is essential fo the protection against turbine blade fouling and corrosion.[/vc_column_text][/vc_column][vc_column width=”1/2″][vc_column_text woodmart_inline=”no” text_larger=”no”]Seawater Removal
AAF purpose built a special rig in Cramlington which simulated offshore marine conditions. The procedure was to measure
seawater penetration through a filter in the clean condition. A dirty condition was then created by introducing sea salt, hydrocarbons and ASHRAE test dust up to the change pressure drop. Further seawater penetration tests were carried out to confirm removal efficiency is consistent over the filter life cycle.[/vc_column_text][/vc_column][/vc_row]
