Description
Wide Range of Applications
The AmerSeal Cube Filter is ideal for a wide variety of applications with high dust-loading conditions. These filters are excellent as prefilters or as single-stage filters in demanding environments.
AAF Flanders AmerSeal Cube filters are made by heat sealing layers of synthetic filtering media together over an interior, corrosion-resistant steel support frame. An overcut of media outside the seal forms a built-in gasket (selvage) between the wire support frame and holding frame, which secures the filter and prevents air bypass. This special feature allows these filters to be installed without the use of retainer fasteners. Optionally, a 13⁄16″ thick U-channel header can be used, allowing for easier installation in side access or other systems where a header is required.
A Moisture-Resistant Alternative
Because these filters are made with only metal and synthetic materials, they are an excellent alternative to paper-frame filters in high moisture areas, because they are naturally moisture-resistant and will not deteriorate or warp in wet or humid conditions.
innovative Self-Sealing Design
Cubes are internally supported filters similar to the AmerSeal Panel. The exception is greater surface area for contamination capture. The AmerSeal Cube filters employs a triple-density, single-piece media designed to catch and hold more particulate. This moisture-resistant, polyester media consists of coarse 40 denier fibers on the upstream layer, followed by an intermediate layer of 15 denier fibers, and a final layer of fine 6 denier fibers coated with a non-drying, pressure-sensitive adhesive. The media is sonically sealed around an internal wire support frame, forming a built-in gasket that secures the filter in place and seals it to prevent bypass. With tapered pockets and no clips or latches required, the AmerSeal Cube Filter’s self-sealing design provides the fastest, easiest installation of any extended surface filter on the market.
