Description
[vc_row][vc_column width=”1/2″][vc_column_text woodmart_inline=”no” text_larger=”no”]The PerfectPleat ULTRA filter has approximately 25% more media than our standard capacity PerfectPleat filter, and also incorporates an antimicrobial. The antimicrobial is applied to the media to preserve the integrity of the media throughout the filter’s useful life by inhibiting microbial growth. PerfectPleat ULTRA filters have distinctive self-supporting characteristics with a pleating pattern that promotes even airflow and maximizes dust holding capacity (DHC). The initial efficiency of the PerfectPleat ULTRA filter is MERV 8, but note that the efficiency increases over the life of the filter. It is well-suited to high moisture conditions where bacterial growth on air filters may be likely to occur and anywhere standard pleated prefilters are currently in use.[/vc_column_text][vc_column_text woodmart_inline=”no” text_larger=”no”]DuraFlex® Media – Patented Media Design
Uniform size virgin fibers are assembled in closely controlled blends to create a media that is both self-supporting and consistent in performance. When pleated, DuraFlex media will hold its shape without the wire support characteristic of conventional pleated filters. That means no potential for the formation of rust, and safer handling. With the superior resiliency of DuraFlex media and no need for wire support, PerfectPleat ULTRA filters can sustain significant abuse and maintain their shape and pleat spacing. The absence of wire also makes the filter totally incinerable, which can simplify disposal.[/vc_column_text][vc_column_text woodmart_inline=”no” text_larger=”no”]Superior Design and Construction
The perimeter frame is constructed from the highest wet-strength 28 pt. beverage carrier board, securely bonded to the media pack. The 1″ model employs three supporting straps on the air-entering and air-leaving sides of the filter to control pleat spacing and support the media pack in the perimeter frame.[/vc_column_text][/vc_column][vc_column width=”1/2″][vc_column_text woodmart_inline=”no” text_larger=”no”]Support straps on the air-entering side are used in combination with a triple layer tri-ply support bar on the air-leaving side of the 2″ model to provide additional strength. The support straps and tri-ply support bar ensure integrity against turbulent airflow. The 2″ filter resists crushing and abuse, and provides excellent lateral stability for installation in side-access systems.
The 4″ model utilizes a two-piece die-cut frame with integral pleat spacers on the air-leaving side. Pleat spacing is controlled by straps bonded to the air-entering side and the multiple rows of pleat spacers on the air-leaving side. The pleat spacers also ensure that the pleats remain open during use, maximizing filter life.[/vc_column_text][vc_row_inner][vc_column_inner width=”1/2″][vc_column_text woodmart_inline=”no” text_larger=”no”]
[/vc_column_text][/vc_column_inner][vc_column_inner width=”1/2″][vc_column_text woodmart_inline=”no” text_larger=”no”]
[/vc_column_text][/vc_column_inner][/vc_row_inner][vc_column_text woodmart_inline=”no” text_larger=”no”]Consult product brochure[/vc_column_text][/vc_column][/vc_row]
